WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000101937  

    Safety Mesh Ø 300mm
    0000101937

    £64.78  EX VAT
     Buy in 3 easy interest free payments of £21.59† with

    Junior LM-2 Spare Parts FAQs

    Straight answers to the questions people ask most when finding and fitting spare parts for a light telescopic extraction arm.

    How do I identify the right spare part for my extraction arm?icon-minus-redicon-plus-red

    Find the arm's type label, which gives the model, and compare the part with the manual's parts list. Hoses are described by length and diameter, and flanges and brackets by how they connect.

    Measure the old part and photograph where it fits. Send photos and label details to our team if you are unsure.

    Why does my arm drift or not stay where I put it?icon-minus-redicon-plus-red

    On many arms the position is held by friction or spring pressure in the joints. As these parts wear, or a joint loosens, the arm can drift. Some designs allow the joints to be tightened, and others need worn parts replacing.

    Check the manual for your arm to see how the joints are adjusted and which parts are listed. If you replace a worn joint part, replace any parts that set the joint pressure at the same time.

    What is the telescopic tube?icon-minus-redicon-plus-red

    The telescopic tube slides in and out to adjust the arm's reach and height. Dents, dirt or a worn seal stop it sliding or let air leak.

    Keep the sliding surfaces clean, and replace a damaged tube rather than trying to straighten it.

    What is the guard on the hood for?icon-minus-redicon-plus-red

    Some hoods have a guard or mesh over the opening. Its purpose varies with the design, but it may keep large objects out of the hood and protect the airflow. Check the manual for your hood to see what yours is for.

    Do not run a hood with a guard removed if it was fitted as standard. Replace a damaged guard, keep it clean because dust can block it and reduce extraction, and switch off the system before cleaning.

    Shop Similar Categories