WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Junior LM-2 Spare Parts

Junior LM-2 Spare Parts FAQs

Straight answers to the questions people ask most when finding and fitting spare parts for a light telescopic extraction arm.

How do I identify the right spare part for my extraction arm?icon-minus-redicon-plus-red

Find the arm's type label, which gives the model, and compare the part with the manual's parts list. Hoses are described by length and diameter, and flanges and brackets by how they connect.

Measure the old part and photograph where it fits. Send photos and label details to our team if you are unsure.

Which parts wear out most often?icon-minus-redicon-plus-red

The flexible hose is usually the first part to wear. Joints that rely on friction can loosen so the arm drifts, and any balancing parts, such as springs or cords depending on the design, can wear or fray. The hood and any guard on it can also be damaged.

Rotating flanges and hinges wear from movement, so check them at each inspection. Your manual shows which parts your arm uses.

Why does my arm drift or not stay where I put it?icon-minus-redicon-plus-red

On many arms the position is held by friction or spring pressure in the joints. As these parts wear, or a joint loosens, the arm can drift. Some designs allow the joints to be tightened, and others need worn parts replacing.

Check the manual for your arm to see how the joints are adjusted and which parts are listed. If you replace a worn joint part, replace any parts that set the joint pressure at the same time.

How is the arm balanced, and what if a balancing part wears?icon-minus-redicon-plus-red

Arms are balanced in different ways. Some use springs, some use a counterweight on a cord or cable, and others rely on friction joints. The balancing parts let the arm move lightly and stay where it is put.

If a cord, cable or spring is frayed, stretched or damaged, the arm can drop or become hard to move. Inspect it regularly, replace it at the first sign of wear, and use the part specified in the manual for your own arm.

What is the telescopic tube?icon-minus-redicon-plus-red

The telescopic tube slides in and out to adjust the arm's reach and height. Dents, dirt or a worn seal stop it sliding or let air leak.

Keep the sliding surfaces clean, and replace a damaged tube rather than trying to straighten it.

What is the guard on the hood for?icon-minus-redicon-plus-red

Some hoods have a guard or mesh over the opening. Its purpose varies with the design, but it may keep large objects out of the hood and protect the airflow. Check the manual for your hood to see what yours is for.

Do not run a hood with a guard removed if it was fitted as standard. Replace a damaged guard, keep it clean because dust can block it and reduce extraction, and switch off the system before cleaning.