WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000100876  

    Plymovent MDB-OUTLET/500 Air Outlet Module Ø 500 mm
    0000100876

    £626.09  EX VAT
     Buy in 3 easy interest free payments of £208.70† with
    Outlet module for MDB. Can also be used as inlet module (without deflector plates).

    MDB-2F Spare Parts FAQs

    Straight answers to the questions people ask most about spare parts for a two-filter cartridge extraction unit with a dust container.

    How do I identify the correct spare for my extraction unit?icon-minus-redicon-plus-red

    Use the data plate on the unit for the model and serial number, then match the part against your manual or parts list. Dust containers, lids, seals, holders and cover plates differ between units and between sizes, so appearance alone can mislead.

    If you are not sure, send photographs of the old part and the data plate to our team.

    Which parts of a cartridge extraction unit wear out?icon-minus-redicon-plus-red

    Filter cartridges are the main consumable. Lid and cover seals, drain valves, clamps and knobs, relays and fuses, and the feet or trolley of the dust container also wear or get damaged in use.

    A failing seal lets unfiltered air leak, and a worn electrical part may stop the unit starting or cause nuisance trips.

    How do I know when to change the filter cartridges?icon-minus-redicon-plus-red

    Falling suction at the extraction point, more fume or dust in the workshop, or an indicator showing high resistance across the filter are the signs. How often depends on how much and what kind of fume or dust the unit handles.

    Follow the maker's guidance, and change the filters before they block completely, as a clogged filter strains the fan.

    Should both filters be changed together?icon-minus-redicon-plus-red

    It depends on the unit, so follow the manual for your own machine. In a unit with more than one filter, the air divides between them, and a filter that has been in use for a while resists the flow more than a new one. Mixing new and old filters can therefore load them unevenly.

    Some makers advise changing filters as a set, while others allow them to be changed individually when each is monitored separately. Check the data plate, the manual and the filter condition indicator for your unit, and ask our team if the guidance is unclear.

    Shop Similar Categories