WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 79060X0010  

    Plymovent FAN-42 Extraction Fan 400v 3ph
    79060X0010

    Select Option 
    Prices From £2259.13 ex VAT

    Fan 3000m³/h free-blowing; 2800 rpm, 1.5kW. Recommended in configurations of 6-8 metres or with filter unit SFD, SFS or SFE. Available in clockwise or counterclockwise rotation models.

    The FAN 42 is a wall-mounted extraction fan that provides extraction for plastic tube extraction arms:

    • Being part of a small central filter system; or
    • Connected to a 2m or 4m extension crane (with or without filtration)

    Features

    • Own mounting bracket
    • Low noise level
    • Efficient

    Recommended for
    A small welding fume extraction system for medium to high-intensity welding processes.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       FAN 42 / SF 4200 User Manual

    Related Items

    Plymovent Extraction Fans FAQs

    Straight answers to the questions people ask most when choosing extraction fans for welding fume, oil mist and dust.

    What does an extraction fan do in a fume extraction system?icon-minus-redicon-plus-red

    The fan creates the airflow that pulls contaminated air from the hood or arm, through the ducting and filter if there is one, and out or back into the workroom. Without enough airflow, even a good hood will not capture fume.

    Choosing the fan is a matter of airflow and resistance. It must move the volume of air needed at the pressure lost in the arms, ducts and filters.

    How do I choose the right size of extraction fan?icon-minus-redicon-plus-red

    Work out how many arms or hoods the fan will serve, how much air each needs, and how much resistance the ducting, bends and any filter add. The fan must provide the needed airflow at that resistance, not just in free air.

    Undersized fans give poor capture, while oversized fans waste energy and add noise. Ask the manufacturer or our team to help size it, giving details of the layout.

    Why is my extraction fan noisy?icon-minus-redicon-plus-red

    Common causes are an unbalanced or dirty fan wheel, worn bearings, loose mountings or housing, a damaged inlet or outlet, and airflow turbulence from tight bends close to the fan. A fan running outside its intended range can also be noisy.

    Isolate the fan before inspecting it. Clean and rebalance or replace the wheel, tighten fixings, and fit anti-vibration mounts or silencers if needed.

    Why does the direction of rotation matter?icon-minus-redicon-plus-red

    A fan wheel is shaped to move air when it turns the intended way. On a three-phase motor, swapping any two phase connections reverses the rotation. Running backwards can sharply cut the airflow, or on some types push air the wrong way, so extraction may be weak even though the fan sounds and feels normal.

    Check the direction against the arrow marked on your fan, and the manual, when it is first wired and after any electrical work. Have the connections made and checked by a competent electrician, with the supply isolated.

    Shop Similar Categories