WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000101907  

    Hose L=650mm /Ø 161mm, Including 2 Hose Clamps
    0000101907

    £64.78  EX VAT
     Buy in 3 easy interest free payments of £21.59† with

    KUA Spare Parts FAQs

    Straight answers to the questions people ask most when choosing replacement parts for a fume extraction arm.

    How do I know when the hose needs replacing?icon-minus-redicon-plus-red

    Replace it if you find splits, cracks, holes, crushed or kinked sections, heavy wear or a stiff, brittle feel. Loose or damaged clamps also let air escape.

    A damaged hose cuts suction at the hood, so fume is captured less well and the extraction unit has to work harder. Replace it promptly instead of taping it.

    Why is my arm not capturing fume as well as it used to?icon-minus-redicon-plus-red

    Loss of capture has several possible causes, so work through them in turn. Check the hose and joints for splits, kinks or loose clamps, then the hood and any grid for clogging, then the damper position, and then the filter or filter indicator at the extraction unit. Also make sure the hood is close to the weld, as capture falls away quickly with distance.

    If you cannot find the cause, check the manual for your own machine for the airflow it should achieve, and have the system tested by a competent person. HSE guidance expects extraction to be kept in good repair and thoroughly examined at regular intervals.

    What does the damper do?icon-minus-redicon-plus-red

    Many arms have a damper, a flap or valve at or near the hood, that lets you adjust or shut off the airflow through that arm. Where several arms share one fan, the system is normally balanced when it is commissioned so each arm gets the flow it needs, so do not change damper settings without checking the manual or the system designer's instructions.

    If the damper sticks, will not stay in position or no longer seals, check the data plate and parts list for your own arm to find the correct replacement.

    What is the safety mesh or grid for?icon-minus-redicon-plus-red

    A mesh or grid on the hood or flange stops larger objects, sparks and debris being drawn into the arm and ductwork.

    Keep it clean and in place. A clogged or damaged mesh reduces airflow and should be cleaned or replaced.

    Shop Similar Categories