WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7603101400VP  

    Plymovent PHV-I (IFA W3) Portable Welding Fume Extractor 230v, with 4m Binzel RAB Grip 355 Air Cooled Mig Fume Torch
    7603101400VP

    Click here to see what's included

    £1889.00  EX VAT
     Buy in 3 easy interest free payments of £629.67† with

    The package includes:

    The Plymovent PHV-I Portable Welding Fume Extractor – 230v

    The PHV-I is a portable high vacuum welding fume extractor. It is equipped with two motors and an automatic start/stop device. The extracted welding fume first passes a metal pre-separator and then goes through the Dura-H main filter with integrated aluminium pre filter. The air leaves the unit through a HEPA filter. An activated carbon filter can be installed as an option. 

    With its wheels, the handle and its compact design the machine is extremely suited to be used in relatively small workshops, in confined spaces or near sources of pollution without a fixed location. The PHV-I can be switched on/off manually or automatically. 

    Specifications

    • Dura-H 12m² Filter
    • HEPA Filter
    • Aluminium Filter
    • Automatic Start/Stop
    • Set of Wheels
    • 2.5m Extraction Hose
    • 2 sets Carbon Brushes

    And the Binzel RAB GRIP 355 MIG Fume Air Cooled Extractor Torch – 4m

    Every welding job generates fumes & smoke that could be hazardous if inhaled. The RAB GRIP Fume Extraction Torches offer efficient fume extraction directly at its source without affecting the protective gas shield. Special design solutions guarantee highly efficient smoke removal.

    • Ergonomic handle with variable feed air slide (on top or below) and optional remote control module (up-down) - for optimum handling
    • Excellent extraction efficiency up to > 95%
    • Considerable weight reduction of air-cooled torches due to the innovative ABICOR BINZEL lightweight BIKOX® cable
    • Optimum dimension of extraction hoses for all types - lightweight cable assemblies with swivel joint, optimum flexibility
    • Direct extraction at the arc - ensures protection of the respiratory system

    Specifications 

    • Rating: 230A at 60% duty cycle CO2, 200A at 60% duty cycle Mixed Gases
    • Wire diameter: 0.8 – 1.2mm
    • Air Cooled
    • Length: 4 metre

    Related Items

    Mobile / Portable Solutions FAQs

    Straight answers to the questions people ask most when choosing and using mobile and portable welding fume extractors.

    When is a mobile or portable fume extractor the right choice?icon-minus-redicon-plus-red

    A mobile or portable extractor suits work that moves around: repairs, site and maintenance jobs, short production runs, or a workshop where welding happens in several places. You wheel it or carry it to the job and capture the fume at the source, with no ductwork to install.

    For a fixed welding bay where the same work is done all day, every day, a stationary or centralised system is often the better fit. A mobile unit can still be useful there as a second, flexible option.

    What is the difference between a mobile unit with an extraction arm and a fume extraction torch?icon-minus-redicon-plus-red

    A mobile unit with an extraction arm has a hose or arm that you position close to the weld. It captures fume from a range of processes, but it must be repositioned as you move along the joint.

    A fume extraction torch has the suction built into the torch itself, so the capture point travels with the arc. It is very effective for MIG welding but only works with that torch and process. Some buyers use an arm for general work and a fume torch for long or awkward welds.

    How do I choose between a single-phase and a three-phase mobile extractor?icon-minus-redicon-plus-red

    It depends on the power at the place you will use it. Single-phase units plug into a standard socket and suit many workshops and smaller sites, but are generally more modest in airflow. Three-phase units usually give more extraction and suit heavier use, but need a three-phase outlet.

    Check the electrical supply where you will work, including voltage and the rating of the circuit, before you choose. If you will use the unit in different locations, think about which supply you can realistically count on at all of them.

    Do I still need respiratory protection if I use a mobile extractor?icon-minus-redicon-plus-red

    Often yes. Source extraction greatly reduces the fume in your breathing zone, but it rarely captures everything, and capture depends on correct positioning. For some materials, such as stainless steel, or for work in confined spaces, extra protection such as a suitable respirator or air-fed helmet may be needed.

    Your employer's risk assessment, based on the material, process and ventilation, decides what is required. The HSE gives guidance on welding fume control. Treat extraction as one layer of control rather than the only one.

    Shop Similar Categories