WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 9880020110  

    H-5.0/45 5m Extraction Exhaust Hose 45mm dia
    9880020110

    £116.52  EX VAT
     Buy in 3 easy interest free payments of £38.84† with
    The H-5.0/45 is used as an extraction or exhaust hose to be connected to a portable welding fume extractor. In case it is used as an exhaust hose, the outlet cover of the portable unit has to be replaced by a special hose connection (type HCH-45).

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure

    ESAB Fume Extractors FAQs

    Straight answers to the questions people ask most when choosing and using a portable welding fume extractor.

    Why does the supply voltage matter when choosing one?icon-minus-redicon-plus-red

    Portable extractors are made for particular mains supplies, and the unit must match the supply where you will use it. Some sites use a reduced voltage supply for power tools, while workshops use the standard mains supply.

    Check the data plate and the supply on your site before choosing. Running a unit on the wrong supply can damage it or create a safety risk, so never use an adaptor to get around a mismatch.

    How close should the extraction nozzle be to the weld?icon-minus-redicon-plus-red

    As close as you can get without interfering with the work, and positioned so the fume is drawn away from your face. Capture falls away quickly with distance, so a nozzle held too far from the arc captures very little.

    Reposition it as you move along the joint. Take care that the airflow does not disturb the shielding gas around the weld, as that can cause defects. Check the manual for your own extractor for the recommended nozzle distance and position.

    How do I know when the filter needs changing?icon-minus-redicon-plus-red

    Signs include weaker suction, a warning light or indicator if the unit has one, more visible fume escaping, and a noticeable rise in the noise of the motor as airflow drops. A blocked filter reduces capture, so the unit looks as if it is working but protects you less.

    Follow the maker's guidance on checking and changing filters. Handle used filters carefully, as they contain the welding fume that has been collected, and dispose of them as the regulations for your waste require.

    Does a portable extractor remove the need for a respirator?icon-minus-redicon-plus-red

    Not automatically. Source extraction reduces your exposure, but it may not remove the hazard completely, especially in confined or awkward positions or with some materials. Whether you also need respiratory protection depends on your risk assessment, the material, the process and the fume levels.

    The HSE treats all welding fume, including mild steel fume, as a cause of lung cancer, so suitable controls must be in place and checked. Use extraction as one part of your controls, and follow the HSE guidance on welding fume.

    Shop Similar Categories