0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing and using mobile and portable welding fume extractors.
A mobile or portable extractor suits work that moves around: repairs, site and maintenance jobs, short production runs, or a workshop where welding happens in several places. You wheel it or carry it to the job and capture the fume at the source, with no ductwork to install.For a fixed welding bay where the same work is done all day, every day, a stationary or centralised system is often the better fit. A mobile unit can still be useful there as a second, flexible option.
A mobile unit with an extraction arm has a hose or arm that you position close to the weld. It captures fume from a range of processes, but it must be repositioned as you move along the joint.A fume extraction torch has the suction built into the torch itself, so the capture point travels with the arc. It is very effective for MIG welding but only works with that torch and process. Some buyers use an arm for general work and a fume torch for long or awkward welds.
Close, because capture falls away quickly with distance. Position the nozzle so the rising fume is drawn into it without the airflow blowing the shielding gas away from the weld, which can spoil the weld.If you see fume escaping past the nozzle, move it closer or reposition it, and keep adjusting as the weld progresses. The best working distance depends on the arm or hose and the airflow of your own unit, so check the data plate and manual for your machine.
It depends on the power at the place you will use it. Single-phase units plug into a standard socket and suit many workshops and smaller sites, but are generally more modest in airflow. Three-phase units usually give more extraction and suit heavier use, but need a three-phase outlet.Check the electrical supply where you will work, including voltage and the rating of the circuit, before you choose. If you will use the unit in different locations, think about which supply you can realistically count on at all of them.
Most mobile extractors show it in one of several ways: a drop in suction, a warning light or gauge that indicates a blocked filter, or a rise in noise as the motor works harder. Fume seen escaping from the nozzle more than before is another sign.Follow the maker's service interval and warning indicators rather than waiting for failure. A blocked filter reduces capture, strains the motor and means you are breathing more fume. Wear suitable gloves and respiratory protection when changing filters, and dispose of used ones as the manufacturer advises.
Often yes. Source extraction greatly reduces the fume in your breathing zone, but it rarely captures everything, and capture depends on correct positioning. For some materials, such as stainless steel, or for work in confined spaces, extra protection such as a suitable respirator or air-fed helmet may be needed.Your employer's risk assessment, based on the material, process and ventilation, decides what is required. The HSE gives guidance on welding fume control. Treat extraction as one layer of control rather than the only one.