WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0328270160  

    Motor Protection Switch MPS-1.6-2.5A 400v 3ph 50/60Hz
    0328270160

    £100.87  EX VAT
     Buy in 3 easy interest free payments of £33.62† with

    Motor protection switch for fan, wall mounting.

    Related Items

    Plymovent MNF Spare Parts FAQs

    Straight answers to the questions people ask most when choosing and fitting spare parts for mobile extraction fan units.

    How do I identify the correct spare part for my extraction unit?icon-minus-redicon-plus-red

    Check the data plate for the unit type and electrical details, and use the manual or parts diagram. Note the voltage, frequency and number of phases, because motors and switches are made for specific supplies.

    Photographs of the unit, its plate and the old part help our team match the right spare.

    What is a motor protection switch and why would I replace one?icon-minus-redicon-plus-red

    A motor protection switch combines a manual on-off switch with overload protection for the motor. It trips if the motor draws too much current, protecting it from damage.

    If the switch is faulty, damaged or keeps tripping for no reason, it may need replacing. A tripping switch can also point to a motor, wiring or blockage fault, so investigate the cause first.

    How do I choose the right setting range for a motor protection switch?icon-minus-redicon-plus-red

    The switch must have a current range that covers the motor's rated current, which is on the motor plate. The switch is then adjusted to the motor's rated current.

    A range that is too high gives poor protection, and one too low trips unnecessarily. Have a competent electrician select and set it.

    Why must motor and fan parts match my supply frequency?icon-minus-redicon-plus-red

    Motor speed, and so airflow and motor loading, depends on the supply frequency. Motors and fan parts are often made in versions for 50 Hz or 60 Hz supplies, and UK mains is 50 Hz.

    Using a part made for a different frequency can change performance and put extra load on the motor. Check the frequency on the data plate of your own unit and its motor, and make sure any replacement is marked for the same supply before you order or fit it.

    Shop Similar Categories