KUA Spare Parts FAQs
Straight answers to the questions people ask most when choosing replacement parts for a fume extraction arm.
What spare parts are in this category?

These are replacement parts for a particular type of fume extraction arm: hoses, inner and outer tubes, frames, hoods, hood collars, joints, connection flanges and fixings.
They let you repair a damaged arm instead of replacing the whole thing, and keep your extraction working properly at the point of capture.
How do I identify the correct part?

Check the data plate on the arm for its type and size, then look in the manual or parts list for the part number or description. Arms usually come in several lengths, so tubes and frames differ by size.
Measure the hose diameter and length, and note which end of the arm the part belongs to. Our team can help you choose if you send a photo.
How do I know when the hose needs replacing?

Replace it if you find splits, cracks, holes, crushed or kinked sections, heavy wear or a stiff, brittle feel. Loose or damaged clamps also let air escape.
A damaged hose cuts suction at the hood, so fume is captured less well and the extraction unit has to work harder. Replace it promptly instead of taping it.
What does the damper do?

Many arms have a damper, a flap or valve at or near the hood, that lets you adjust or shut off the airflow through that arm. Where several arms share one fan, the system is normally balanced when it is commissioned so each arm gets the flow it needs, so do not change damper settings without checking the manual or the system designer's instructions.
If the damper sticks, will not stay in position or no longer seals, check the data plate and parts list for your own arm to find the correct replacement.