WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000101944  

    Connection Flange with Grid
    0000101944

    £52.17  EX VAT
     Buy in 3 easy interest free payments of £17.39† with

    EA Spare Parts FAQs

    Straight answers to the questions people ask most when finding and fitting spare parts for a fume extraction arm.

    How do I identify the right spare part for my extraction arm?icon-minus-redicon-plus-red

    Look for the arm's type label or data plate, which usually gives the model and sometimes the length. Then compare the part with the manual's parts list. Hoses are described by length and diameter, and brackets and flanges by how they connect.

    Measure the old part if you can, and note the arm's reach and connection size. If you are unsure, send photos and the label details to our team before you buy.

    Which parts of an extraction arm wear out most often?icon-minus-redicon-plus-red

    The flexible hose is usually the first, as it flexes constantly and can crack, tear or go stiff. Friction plates and washers wear, so the arm stops holding its position. Rubber collars, seals and swivel rings can perish or crack.

    Wall brackets and flanges seldom wear but can be damaged by knocks. Check them during your regular inspections.

    How do I know the hose needs replacing?icon-minus-redicon-plus-red

    Look for cracks, splits, holes, flattened or collapsed sections, and any place where it has been repaired with tape. A damaged hose leaks, so the arm draws less fume from the weld and more from the surrounding air.

    A hose that has stiffened with age or heat can also stop the arm moving smoothly. Replace it rather than patching it, and fit new clamps.

    Can I fit these spare parts myself?icon-minus-redicon-plus-red

    Most mechanical spares on an extraction arm are straightforward to fit with basic tools and the manual. Isolate the extraction system first so the fan cannot start, and support the arm so it cannot swing or fall.

    Work at height on a bracket or wall mounting needs safe access, and the bracket must be fixed to a surface that can carry the load. If you are not confident, ask a competent person.

    Shop Similar Categories