WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : PHV-W3-PKG  

    Plymovent PHV-W3 Portable Welding Fume Extractor with Hose Package, 230v
    PHV-W3-PKG

    Select Option 
    Prices From £2135.65 ex VAT

    The PHV is a portable high vacuum welding fume extractor. It is equipped with two motors and an automatic start/stop device. The extracted welding fume first passes a metal pre-separator and then goes through the main filter cartridge with integrated aluminium pre filter. The air leaves the unit through a HEPA filter and an activated carbon filter.

    With its wheels, the handle and its compact design the machine is extremely suited to be used in relatively small workshops, in confined spaces or near sources of pollution without a fixed location.

    The PHV can be switched on/off manually or automatically.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       PHV Parts Breakdown
       PHV User Manual

    Mobile / Portable Solutions FAQs

    Straight answers to the questions people ask most when choosing and using mobile and portable welding fume extractors.

    When is a mobile or portable fume extractor the right choice?icon-minus-redicon-plus-red

    A mobile or portable extractor suits work that moves around: repairs, site and maintenance jobs, short production runs, or a workshop where welding happens in several places. You wheel it or carry it to the job and capture the fume at the source, with no ductwork to install.

    For a fixed welding bay where the same work is done all day, every day, a stationary or centralised system is often the better fit. A mobile unit can still be useful there as a second, flexible option.

    How close should the extraction nozzle be to the weld?icon-minus-redicon-plus-red

    Close, because capture falls away quickly with distance. Position the nozzle so the rising fume is drawn into it without the airflow blowing the shielding gas away from the weld, which can spoil the weld.

    If you see fume escaping past the nozzle, move it closer or reposition it, and keep adjusting as the weld progresses. The best working distance depends on the arm or hose and the airflow of your own unit, so check the data plate and manual for your machine.

    How do I choose between a single-phase and a three-phase mobile extractor?icon-minus-redicon-plus-red

    It depends on the power at the place you will use it. Single-phase units plug into a standard socket and suit many workshops and smaller sites, but are generally more modest in airflow. Three-phase units usually give more extraction and suit heavier use, but need a three-phase outlet.

    Check the electrical supply where you will work, including voltage and the rating of the circuit, before you choose. If you will use the unit in different locations, think about which supply you can realistically count on at all of them.

    Do I still need respiratory protection if I use a mobile extractor?icon-minus-redicon-plus-red

    Often yes. Source extraction greatly reduces the fume in your breathing zone, but it rarely captures everything, and capture depends on correct positioning. For some materials, such as stainless steel, or for work in confined spaces, extra protection such as a suitable respirator or air-fed helmet may be needed.

    Your employer's risk assessment, based on the material, process and ventilation, decides what is required. The HSE gives guidance on welding fume control. Treat extraction as one layer of control rather than the only one.

    Shop Similar Categories