WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7900070080  

    RS-2 1.5m Rail Set for Mounting Welding Equipment
    7900070080

    £329.47  EX VAT
     Buy in 3 easy interest free payments of £109.82† with

    The RS-2 Rail set is attached to the NEC-2 crane for the purpose of mounting welding equipment

    Related Items

    Plymovent Spares FAQs

    Questions about replacement parts for welding fume extraction equipment: filters, hoses, clamps, dampers, flanges, mounting rails and automatic start/stop devices.

    How do I know when an extraction filter needs replacing?icon-minus-redicon-plus-red

    Most extraction units have a gauge or indicator light that shows how clogged the filter is, because as the filter fills with fume the resistance to airflow rises and the suction at the hood falls. Many filters are cleaned by the unit's own cleaning function, and replacement is needed when cleaning no longer brings the reading back to normal.

    Filters are generally replaced when they are loaded, rather than at a fixed interval, because it depends on how much welding is done. Follow the unit's manual for the correct gauge reading, cleaning method and replacement procedure. If fume is escaping the hood more than usual, check the filter first.

    If my extraction is faulty, can I keep welding with the doors open?icon-minus-redicon-plus-red

    No. Open doors and windows usually do not remove welding fume well enough, and general ventilation on its own is not a substitute for capturing fume at source. Welding fume, including from mild steel, can cause lung cancer, and exposure should be controlled, typically with local exhaust ventilation.

    If extraction cannot control the fume, suitable respiratory protective equipment is needed as well, and this is a matter for your risk assessment. A fault in a part such as a hose, filter or fan should be put right promptly. If you are unsure whether the system is still doing its job, ask a competent person to check it.

    Does hose length matter, and can I add extra hose?icon-minus-redicon-plus-red

    Yes. Extra hose, bends and kinks add resistance and reduce the airflow at the hood, so use the shortest, straightest run that reaches the work. Fixed systems are best with rigid ducting and short flexible hoses, and adding hoses or closing inlets can make a system ineffective. Such a system should be designed by competent people.

    Before lengthening a hose or fitting a longer one, check the manufacturer's maximum length and that the unit has the capacity. After any change, check that the hood still captures the fume, and tell the person who carries out the examination of the system.

    How do I match a replacement hose to my extraction unit?icon-minus-redicon-plus-red

    Hoses come in different bores and are used for different types of extraction. Large-bore hoses suit high-volume systems with a big hood or arm, while small-bore hoses suit high-velocity nozzles that sit very close to the arc. The two are not interchangeable.

    Measure the hose you are replacing, or check the unit's manual or data plate, so the internal diameter, the cuff or spigot size and the length suit your system. Choose a hose rated for welding fume and heat, and keep the same bore rather than reducing it, because a narrower hose reduces airflow. Check that the new hose fits the clamps and flange you already have.

    Shop Similar Categories