WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7900060020  

    EN-20 Funnel nozzle with magnetic foot and hose connection - PHV
    7900060020

    £189.57  EX VAT
     Buy in 3 easy interest free payments of £63.19† with

    Brochures & Manuals

    Related Items

    ESAB Fume Extractors FAQs

    Straight answers to the questions people ask most when choosing and using a portable welding fume extractor.

    What is a portable fume extractor best used for?icon-minus-redicon-plus-red

    A portable extractor is a compact unit with a fan, a filter and a flexible arm or hose that you position close to the weld. It suits small workshops, repair work, site work and jobs that move around, where a fixed system is not practical.

    It works best for light to moderate welding. For several welders working at once, or heavy continuous production, a larger fixed system is usually a better fit.

    Why does the supply voltage matter when choosing one?icon-minus-redicon-plus-red

    Portable extractors are made for particular mains supplies, and the unit must match the supply where you will use it. Some sites use a reduced voltage supply for power tools, while workshops use the standard mains supply.

    Check the data plate and the supply on your site before choosing. Running a unit on the wrong supply can damage it or create a safety risk, so never use an adaptor to get around a mismatch.

    How close should the extraction nozzle be to the weld?icon-minus-redicon-plus-red

    As close as you can get without interfering with the work, and positioned so the fume is drawn away from your face. Capture falls away quickly with distance, so a nozzle held too far from the arc captures very little.

    Reposition it as you move along the joint. Take care that the airflow does not disturb the shielding gas around the weld, as that can cause defects. Check the manual for your own extractor for the recommended nozzle distance and position.

    Will the extractor disturb my shielding gas?icon-minus-redicon-plus-red

    It can, if the suction is too strong or the nozzle is too close and pointing straight at the arc. A disturbed gas shield causes porosity in the weld.

    Place the nozzle to the side and slightly behind the weld, and adjust the distance and angle until the fume is captured without blowing the gas away. Test on scrap material first if the weld quality is critical.

    Shop Similar Categories