WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 614.0184.1  

    Binzel RAB GRIP 355LW BBH MIG Fume Extraction Torch 5m (Air Cooled) 300A CO2, 270A Mixed Gases
    614.0184.1

    £596.60  EX VAT
    SSP Suggested Selling Price = £745.70  YOU SAVE £149.10
     Buy in 3 easy interest free payments of £198.87† with

    Binzel RAB GRIP – The clean solution...

    Every welding job creates fumes and smoke that can be hazardous if inhaled. Based on the popular range of MB torches, the RAB GRIP Fume Extraction Torches offer efficient fume extraction through the torch itself. Special design solutions guarantee highly efficient smoke removal directly at its source without affecting the protective gas shield.

    Benefits of the RAB Grip Fume Torch:

    • Direct extraction at the arc – ensures protection of the welder’s respiratory system
    • Problem free installation in all existing MIG/MAG workstations
    • Small extraction tube diameter – better accessibility
    • Aluminium extraction tube – considerable weight saving
    • Handle with extraction control and swivel joint – optimised handling
    • Smaller diameter extraction hoses for all types – lower handling weight, optimum flexibility
    • Considerable weight reduction of air-cooled torches due to the innovative ABICOR BINZEL Low-Weight Bikox cable®

    Mobile / Portable Solutions FAQs

    Straight answers to the questions people ask most when choosing and using mobile and portable welding fume extractors.

    What is the difference between a mobile unit with an extraction arm and a fume extraction torch?icon-minus-redicon-plus-red

    A mobile unit with an extraction arm has a hose or arm that you position close to the weld. It captures fume from a range of processes, but it must be repositioned as you move along the joint.

    A fume extraction torch has the suction built into the torch itself, so the capture point travels with the arc. It is very effective for MIG welding but only works with that torch and process. Some buyers use an arm for general work and a fume torch for long or awkward welds.

    How close should the extraction nozzle be to the weld?icon-minus-redicon-plus-red

    Close, because capture falls away quickly with distance. Position the nozzle so the rising fume is drawn into it without the airflow blowing the shielding gas away from the weld, which can spoil the weld.

    If you see fume escaping past the nozzle, move it closer or reposition it, and keep adjusting as the weld progresses. The best working distance depends on the arm or hose and the airflow of your own unit, so check the data plate and manual for your machine.

    How do I choose between a single-phase and a three-phase mobile extractor?icon-minus-redicon-plus-red

    It depends on the power at the place you will use it. Single-phase units plug into a standard socket and suit many workshops and smaller sites, but are generally more modest in airflow. Three-phase units usually give more extraction and suit heavier use, but need a three-phase outlet.

    Check the electrical supply where you will work, including voltage and the rating of the circuit, before you choose. If you will use the unit in different locations, think about which supply you can realistically count on at all of them.

    Do I still need respiratory protection if I use a mobile extractor?icon-minus-redicon-plus-red

    Often yes. Source extraction greatly reduces the fume in your breathing zone, but it rarely captures everything, and capture depends on correct positioning. For some materials, such as stainless steel, or for work in confined spaces, extra protection such as a suitable respirator or air-fed helmet may be needed.

    Your employer's risk assessment, based on the material, process and ventilation, decides what is required. The HSE gives guidance on welding fume control. Treat extraction as one layer of control rather than the only one.

    Shop Similar Categories