WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0050101220  

    Hose Set UltraFlex-4 /LC
    0050101220

    £146.09  EX VAT
     Buy in 3 easy interest free payments of £48.70† with

    UltraFlex-4 / LC Spare Parts FAQs

    Straight answers to the questions people ask most when choosing and fitting spare parts for a long-reach flexible fume extraction arm.

    What does a sagging or heavy-feeling arm tell me?icon-minus-redicon-plus-red

    Arms are usually balanced by springs or similar counterbalance parts and held by friction in their joints. If the arm droops or feels heavy, a spring has probably weakened or broken, or a joint has loosened or worn.

    Check joint tension only if the manual for your arm allows it. Whether springs are replaced singly or together depends on the design, so follow the parts list and instructions for your own model. Support the arm before any work, because springs can hold stored force.

    How do I choose the right spring?icon-minus-redicon-plus-red

    Springs are made for a particular arm size and position, such as the hood side or the wall or unit side. A spring of the wrong strength will unbalance the arm.

    Check the data plate, the parts list and the drawing in the manual for your own machine, and confirm which end of the arm the spring belongs to. Support the arm before working on it, since springs can hold stored force, and use a competent engineer if you are not confident.

    What is the inner tube and how do I tell if it needs replacing?icon-minus-redicon-plus-red

    The inner tube is the rigid section that carries the air and the joints. Look for bends, dents, cracks or corrosion, and check whether the arm moves smoothly and keeps a tight seal.

    Tube materials and construction differ between arm designs, so check the data plate and manual for your own machine. Choose the tube listed for your arm and for the correct end.

    When should I replace the hose?icon-minus-redicon-plus-red

    Replace it if you find tears, burn marks, collapsed sections or loose ends. A damaged hose reduces suction and lets fume escape.

    Check the diameter and length, and that the hose is listed for your arm. Some arms also have small internal parts that support or space the hose, so check these for wear or damage when you change it, using the manual for your own machine.

    Shop Similar Categories