WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

UltraFlex-4 / LC Spare Parts

UltraFlex-4 / LC Spare Parts FAQs

Straight answers to the questions people ask most when choosing and fitting spare parts for a long-reach flexible fume extraction arm.

How do I make sure I order the right spare for my arm?icon-minus-redicon-plus-red

Find the model on the arm's data plate or label, then use the manual's parts list and drawing to find the part. Note the arm's length, hose diameter and mounting.

Similar arms often use similar-looking parts that differ in length or fixing. If you are unsure, our team can help you confirm the match.

Why can a longer arm be harder on its parts?icon-minus-redicon-plus-red

In general, a longer reach puts more weight and leverage on the joints, so springs, hinges and friction parts may work harder and wear sooner, particularly at the joints that move most. How much this matters depends on the design of your arm.

Check the data plate and manual for your own machine. Regular checks of the springs, tubes and fixings help you catch wear before the arm sags or becomes hard to position.

What does a sagging or heavy-feeling arm tell me?icon-minus-redicon-plus-red

Arms are usually balanced by springs or similar counterbalance parts and held by friction in their joints. If the arm droops or feels heavy, a spring has probably weakened or broken, or a joint has loosened or worn.

Check joint tension only if the manual for your arm allows it. Whether springs are replaced singly or together depends on the design, so follow the parts list and instructions for your own model. Support the arm before any work, because springs can hold stored force.

How do I choose the right spring?icon-minus-redicon-plus-red

Springs are made for a particular arm size and position, such as the hood side or the wall or unit side. A spring of the wrong strength will unbalance the arm.

Check the data plate, the parts list and the drawing in the manual for your own machine, and confirm which end of the arm the spring belongs to. Support the arm before working on it, since springs can hold stored force, and use a competent engineer if you are not confident.

What is the inner tube and how do I tell if it needs replacing?icon-minus-redicon-plus-red

The inner tube is the rigid section that carries the air and the joints. Look for bends, dents, cracks or corrosion, and check whether the arm moves smoothly and keeps a tight seal.

Tube materials and construction differ between arm designs, so check the data plate and manual for your own machine. Choose the tube listed for your arm and for the correct end.

When should I replace the hose?icon-minus-redicon-plus-red

Replace it if you find tears, burn marks, collapsed sections or loose ends. A damaged hose reduces suction and lets fume escape.

Check the diameter and length, and that the hose is listed for your arm. Some arms also have small internal parts that support or space the hose, so check these for wear or damage when you change it, using the manual for your own machine.