Junior LM-2 Spare Parts FAQs
Straight answers to the questions people ask most when finding and fitting spare parts for a light telescopic extraction arm.
How do I identify the right spare part for my extraction arm?

Find the arm's type label, which gives the model, and compare the part with the manual's parts list. Hoses are described by length and diameter, and flanges and brackets by how they connect.
Measure the old part and photograph where it fits. Send photos and label details to our team if you are unsure.
Which parts wear out most often?

The flexible hose is usually the first part to wear. Joints that rely on friction can loosen so the arm drifts, and any balancing parts, such as springs or cords depending on the design, can wear or fray. The hood and any guard on it can also be damaged.
Rotating flanges and hinges wear from movement, so check them at each inspection. Your manual shows which parts your arm uses.
Why does my arm drift or not stay where I put it?

On many arms the position is held by friction or spring pressure in the joints. As these parts wear, or a joint loosens, the arm can drift. Some designs allow the joints to be tightened, and others need worn parts replacing.
Check the manual for your arm to see how the joints are adjusted and which parts are listed. If you replace a worn joint part, replace any parts that set the joint pressure at the same time.
What is the telescopic tube?

The telescopic tube slides in and out to adjust the arm's reach and height. Dents, dirt or a worn seal stop it sliding or let air leak.
Keep the sliding surfaces clean, and replace a damaged tube rather than trying to straighten it.