KUA Spare Parts FAQs
Straight answers to the questions people ask most when choosing replacement parts for a fume extraction arm.
What spare parts are in this category?

These are replacement parts for a particular type of fume extraction arm: hoses, inner and outer tubes, frames, hoods, hood collars, joints, connection flanges and fixings.
They let you repair a damaged arm instead of replacing the whole thing, and keep your extraction working properly at the point of capture.
How do I identify the correct part?

Check the data plate on the arm for its type and size, then look in the manual or parts list for the part number or description. Arms usually come in several lengths, so tubes and frames differ by size.
Measure the hose diameter and length, and note which end of the arm the part belongs to. Our team can help you choose if you send a photo.
How do I know when the hose needs replacing?

Replace it if you find splits, cracks, holes, crushed or kinked sections, heavy wear or a stiff, brittle feel. Loose or damaged clamps also let air escape.
A damaged hose cuts suction at the hood, so fume is captured less well and the extraction unit has to work harder. Replace it promptly instead of taping it.
Why is my arm not capturing fume as well as it used to?

Loss of capture has several possible causes, so work through them in turn. Check the hose and joints for splits, kinks or loose clamps, then the hood and any grid for clogging, then the damper position, and then the filter or filter indicator at the extraction unit. Also make sure the hood is close to the weld, as capture falls away quickly with distance.
If you cannot find the cause, check the manual for your own machine for the airflow it should achieve, and have the system tested by a competent person. HSE guidance expects extraction to be kept in good repair and thoroughly examined at regular intervals.