WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000100293  

    Plymovent Removable Filter WRAP/2
    0000100293

    £29.57  EX VAT

    Related Items

    Plymovent Spares FAQs

    Questions about replacement parts for welding fume extraction equipment: filters, hoses, clamps, dampers, flanges, mounting rails and automatic start/stop devices.

    When should a damaged extraction hose be repaired or replaced?icon-minus-redicon-plus-red

    Check hoses and hoods by eye regularly. Hoods and hoses should be replaced or repaired where there is damage or deterioration. Look for splits, crushed or kinked sections, worn spiral reinforcement, burn marks from hot work and loose cuffs.

    A hose with holes or a collapsed section leaks air and reduces the suction at the hood, so fume may escape without it being obvious. Replace the hose rather than taping a long split, and check the replacement is suitable for welding use. Parts from different makers can be used together if they are compatible and fit for the task.

    How often should fume extraction be examined, and what can I check myself?icon-minus-redicon-plus-red

    A local exhaust ventilation system must have a thorough examination and test by a competent person at regular intervals, with a record kept. Your safety adviser can confirm how often your system needs it, and some systems need it more often. This is separate from the day-to-day checks you do yourself.

    Before welding, check that the extraction is switched on and working, that hoses and hoods are undamaged, and that any airflow indicator or filter gauge reads normally. Weld fume is usually visible, so you can also judge how well it is being captured. Keep notes of checks, repairs and filter changes, and follow the manufacturer's instructions for maintenance.

    If my extraction is faulty, can I keep welding with the doors open?icon-minus-redicon-plus-red

    No. Open doors and windows usually do not remove welding fume well enough, and general ventilation on its own is not a substitute for capturing fume at source. Welding fume, including from mild steel, can cause lung cancer, and exposure should be controlled, typically with local exhaust ventilation.

    If extraction cannot control the fume, suitable respiratory protective equipment is needed as well, and this is a matter for your risk assessment. A fault in a part such as a hose, filter or fan should be put right promptly. If you are unsure whether the system is still doing its job, ask a competent person to check it.

    How do I match a replacement hose to my extraction unit?icon-minus-redicon-plus-red

    Hoses come in different bores and are used for different types of extraction. Large-bore hoses suit high-volume systems with a big hood or arm, while small-bore hoses suit high-velocity nozzles that sit very close to the arc. The two are not interchangeable.

    Measure the hose you are replacing, or check the unit's manual or data plate, so the internal diameter, the cuff or spigot size and the length suit your system. Choose a hose rated for welding fume and heat, and keep the same bore rather than reducing it, because a narrower hose reduces airflow. Check that the new hose fits the clamps and flange you already have.

    Shop Similar Categories