0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing and using fume extraction MIG torches.
It is a MIG torch with a built-in extraction path. A nozzle around the gas shroud draws fume in as it is produced, through a second hose that runs alongside the main cable to an extraction unit. This captures fume right at the source, before it reaches your breathing zone.The welding side works like a standard torch, but the torch is a little heavier and bulkier, and it needs a suitable extractor to work.
The torch end must match your machine's torch connection, commonly a Euro type fitting. The extraction hose then connects to the extractor, not to the welding machine.Check the connector type on your machine and the hose fitting on your extractor. If either does not match, ask before buying, as adaptors can reduce performance or fit badly.
Yes, you need an extractor that is specified for use with extraction torches. Many are designed to pull a strong suction through a narrow hose rather than moving a large volume of air through a wide arm, but the exact design differs between makers, so check what your torch and extractor require.The extractor must be able to draw enough air through the torch, and the hose connections must match. Weak suction means poor capture, while suction that is too strong can disturb the shielding gas. Check the manuals for both the torch and the extractor before you buy.
Air-cooled torches are generally simpler and lighter, and suit light to medium work and shorter welds. Water-cooled torches are usually chosen for higher currents and longer continuous welding, but they need a cooler and more upkeep.The extraction hose adds weight to the cable, so think about how it will feel over a full working day as well as the current rating. Check the duty cycle in the manual at the current and gas you actually use, and compare the weight and handling of the torches you are considering.
Pick a rating comfortably above the current you weld at, for the gas you use and the duty you need, as the real rating is affected by both. Then choose the shortest length that lets you reach the work, because longer cables are heavier, reduce suction at the nozzle and are harder to handle.Check the maker's ratings for your gas, not just the headline figure.
It can if the suction is set too high or the nozzle is worn or damaged. Too much suction draws gas away and causes porosity. Too little leaves fume uncaptured.Set the extractor's suction as the manufacturer recommends, check gas flow, and test on scrap. If porosity appears, look at gas flow, suction and draughts together.