0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when finding and fitting spare parts for a light telescopic extraction arm.
Find the arm's type label, which gives the model, and compare the part with the manual's parts list. Hoses are described by length and diameter, and flanges and brackets by how they connect.Measure the old part and photograph where it fits. Send photos and label details to our team if you are unsure.
The flexible hose is usually the first part to wear. Joints that rely on friction can loosen so the arm drifts, and any balancing parts, such as springs or cords depending on the design, can wear or fray. The hood and any guard on it can also be damaged.Rotating flanges and hinges wear from movement, so check them at each inspection. Your manual shows which parts your arm uses.
On many arms the position is held by friction or spring pressure in the joints. As these parts wear, or a joint loosens, the arm can drift. Some designs allow the joints to be tightened, and others need worn parts replacing.Check the manual for your arm to see how the joints are adjusted and which parts are listed. If you replace a worn joint part, replace any parts that set the joint pressure at the same time.
Arms are balanced in different ways. Some use springs, some use a counterweight on a cord or cable, and others rely on friction joints. The balancing parts let the arm move lightly and stay where it is put.If a cord, cable or spring is frayed, stretched or damaged, the arm can drop or become hard to move. Inspect it regularly, replace it at the first sign of wear, and use the part specified in the manual for your own arm.
The telescopic tube slides in and out to adjust the arm's reach and height. Dents, dirt or a worn seal stop it sliding or let air leak.Keep the sliding surfaces clean, and replace a damaged tube rather than trying to straighten it.
Some hoods have a guard or mesh over the opening. Its purpose varies with the design, but it may keep large objects out of the hood and protect the airflow. Check the manual for your hood to see what yours is for.Do not run a hood with a guard removed if it was fitted as standard. Replace a damaged guard, keep it clean because dust can block it and reduce extraction, and switch off the system before cleaning.