WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Plymovent Plastic Tube Arms

Plymovent Plastic Tube Arms FAQs

Straight answers to the questions people ask most when choosing and using flexible and telescopic plastic tube extraction arms.

What is a plastic tube extraction arm and how does it differ from a metal one?icon-minus-redicon-plus-red

A plastic tube arm uses a flexible or telescopic tube, usually with a hood on the end, to carry fume from the weld to a fan or filter unit. Because the tube is lightweight and bends or extends, the arm is easy to move around and can reach awkward spots.

Metal arms are made of rigid sections with joints, so they hold position more firmly and are tougher. Plastic arms are lighter and often simpler to fit, but the tube can be damaged by heat, sparks and knocks more easily, so they suit lighter-duty work and places where the hood is moved often.

What types of extraction arm are there and how do they differ?icon-minus-redicon-plus-red

Extraction arms come in several forms, for example arms with a flexible tube that holds its position, arms with rigid sections and joints, and arms that slide in and out to change their length. Makers use different names for these types, and the way they move, how far they reach and how well they hold position vary between ranges.

Check the maker's description, the reach and the temperature rating for the arm you are considering, and choose one that suits how often the hood is moved and the kind of work you do.

How do I choose the right length?icon-minus-redicon-plus-red

Measure from the mounting point to the furthest place you will weld, and choose an arm that reaches it comfortably without being stretched taut. A fully extended arm can be hard to hold in position.

Also allow for the ceiling height, and think about where the arm will rest when not in use. Where headroom is limited, special low-ceiling versions exist. If the work area is wide, consider the mounting position or a rail or crane arrangement rather than a very long arm.

How close should the hood be to the weld?icon-minus-redicon-plus-red

Close. Capture falls off quickly with distance, so a hood a short way from the arc catches far more fume than one held far away. There is no single distance that suits every hood, because the right position depends on the hood shape, the airflow and any draughts in the workshop.

Check the maker's advice on the capture distance for your hood. Place it beside or slightly behind the arc, in the direction the fume rises, so fume is drawn away from the welder's face, and re-position it as you move along the joint.

Will the arm stay where I put it?icon-minus-redicon-plus-red

A good arm holds its position, but how well depends on the type and its condition. Over time, joints and springs can wear, and the arm can start to drift or droop. Adjustments are usually provided for tensioning, so check the manual.

Also check that anything added to the hood, such as a light or a heavier hood, has not upset the balance. If an arm will not hold, it is more effective to correct it or replace worn parts than to leave the welder to hold it.

Can plastic arms be used for hot or spark-heavy work?icon-minus-redicon-plus-red

Take care. Plastic and fabric tubes can be damaged by hot metal, sparks and spatter, which can burn through them and cause leaks and a fire risk. Temperature ratings differ from one arm to another, so check the data plate and manual for the figures that apply to yours.

For heavy spatter, cutting or grinding with lots of sparks, an arm made for high temperatures, or a spark arrestor in the duct, is generally the safer choice. Never use an arm where sparks could ignite the tube or the dust collected in it.