WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE

Plymovent PHV Options

Filters and hose options for the Plymovent PHV fume extractor

ESAB Fume Extractors FAQs

Straight answers to the questions people ask most when choosing and using a portable welding fume extractor.

What is a portable fume extractor best used for?icon-minus-redicon-plus-red

A portable extractor is a compact unit with a fan, a filter and a flexible arm or hose that you position close to the weld. It suits small workshops, repair work, site work and jobs that move around, where a fixed system is not practical.

It works best for light to moderate welding. For several welders working at once, or heavy continuous production, a larger fixed system is usually a better fit.

Why does the supply voltage matter when choosing one?icon-minus-redicon-plus-red

Portable extractors are made for particular mains supplies, and the unit must match the supply where you will use it. Some sites use a reduced voltage supply for power tools, while workshops use the standard mains supply.

Check the data plate and the supply on your site before choosing. Running a unit on the wrong supply can damage it or create a safety risk, so never use an adaptor to get around a mismatch.

How close should the extraction nozzle be to the weld?icon-minus-redicon-plus-red

As close as you can get without interfering with the work, and positioned so the fume is drawn away from your face. Capture falls away quickly with distance, so a nozzle held too far from the arc captures very little.

Reposition it as you move along the joint. Take care that the airflow does not disturb the shielding gas around the weld, as that can cause defects. Check the manual for your own extractor for the recommended nozzle distance and position.

Will the extractor disturb my shielding gas?icon-minus-redicon-plus-red

It can, if the suction is too strong or the nozzle is too close and pointing straight at the arc. A disturbed gas shield causes porosity in the weld.

Place the nozzle to the side and slightly behind the weld, and adjust the distance and angle until the fume is captured without blowing the gas away. Test on scrap material first if the weld quality is critical.

How do I know when the filter needs changing?icon-minus-redicon-plus-red

Signs include weaker suction, a warning light or indicator if the unit has one, more visible fume escaping, and a noticeable rise in the noise of the motor as airflow drops. A blocked filter reduces capture, so the unit looks as if it is working but protects you less.

Follow the maker's guidance on checking and changing filters. Handle used filters carefully, as they contain the welding fume that has been collected, and dispose of them as the regulations for your waste require.

Does a portable extractor remove the need for a respirator?icon-minus-redicon-plus-red

Not automatically. Source extraction reduces your exposure, but it may not remove the hazard completely, especially in confined or awkward positions or with some materials. Whether you also need respiratory protection depends on your risk assessment, the material, the process and the fume levels.

The HSE treats all welding fume, including mild steel fume, as a cause of lung cancer, so suitable controls must be in place and checked. Use extraction as one part of your controls, and follow the HSE guidance on welding fume.