0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing equipment and consumables by maker.
Start with the job rather than the name on the machine. Work out the process, the material and thickness, how often you will weld and where the work will be done, then compare the specifications of equipment that suits. Most established makers build good equipment, and the real differences tend to be in features, build quality, ease of use and the support behind the product.It also helps to ask other welders in your trade what they use and why, and to try a machine or helmet in your hands where you can. If you are unsure, our team can help you narrow the choice.
Often it is the simplest route. Parts from one maker are designed to work together, so connections, controls and consumables line up, and you have a single source of advice and support. Some machines also use digital connections between the machine, torch and remote controls that only work with that maker's own parts.It is not essential, though. Many items, such as gas regulators, standard torch connectors, clamps and general safety equipment, follow common fittings and can be mixed. Check compatibility against the maker's information before combining parts from different makers.
Genuine parts are made or approved by the equipment maker for a specific model. Compatible parts are made by another company to fit. Some compatible parts work well, but others differ slightly in dimensions, materials or finish, and that can affect fit, arc stability, how well they handle heat and how long they last.For safety-critical items such as electrical parts, gas fittings and protective lenses, follow the maker's recommendation, and check the warranty terms before fitting parts the maker has not approved. For everyday wear parts, compare the specification carefully rather than assuming that anything that fits is equivalent.
Look first at the input supply: the voltage, whether it is single-phase or three-phase, and the input current. Then look at the output: the current range, and the duty cycle at a stated current, which tells you how long the machine can weld in a ten-minute period before it needs to cool.Also check which processes it supports, the wire or electrode sizes it takes, the cooling method, the weight and the protection rating. When you compare machines, compare duty cycle at the same current, because a high maximum current means little if the machine can only hold it for a short time.