0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Suitable for PTi250C / i320C STD / ADV versions.
Straight answers to the questions people ask most when choosing and using a separate-feeder three phase MIG welder package.
A separate MIG welder has the power source and the wire feeder as two units joined by an interconnecting cable. The power source stays on the floor or a trolley, and the feeder sits near the work, carrying the wire spool and the torch.This gives a shorter, lighter torch cable, smoother wire feeding and much more reach around large fabrications than a compact machine that has everything in one case.
A package normally brings together the power source, wire feeder, torch, interconnecting cable and work return lead, so the main parts are matched. Some include a trolley or a cooling unit. The contents vary, so check the product listing.You will still need shielding gas and a regulator, welding wire to suit the material, and your protective equipment. Keep spare consumables such as contact tips and nozzles.
An air-cooled torch is lighter and needs nothing extra, and it suits moderate current and intermittent welding. A water-cooled torch needs a cooling unit with a pump and coolant, but it carries higher current for longer and stays more comfortable.Choose water-cooled for heavy, continuous or high-current work. Keep the coolant topped up with the recommended type and never run the torch without flow.
These machines are normally three phase and need a supply of the voltage on the data plate, usually 400 volts in the UK, with a correctly rated plug, cable and protective devices.Have a competent electrician install or check the supply. If you want to use a generator, check the manufacturer's advice first, because an undersized or poor quality supply can cause faults.