0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Spares for a powered air welding helmet system: how to pick the right part, what wears, and how to keep the system working as intended.
On many powered welding respirators the air passes through a stack of layers before it reaches the wearer. A spark arrestor or filter cover usually sits at the front to stop hot particles reaching the filter media. A pre-filter usually catches coarse debris so the main filter does not clog as quickly. The particle filter is the part that removes fine fume and dust.The exact layout and which parts are fitted depend on the maker, so follow your manual for the order and for how each layer is fitted. Never run the unit with a layer left out unless the manual says that is allowed.
No. A particle filter only removes solid and liquid particles such as welding fume and dust. It does not protect against gases or vapours, and a gas or vapour filter alone does not protect against particles. HSE guidance says never to use a particle-only filter against gas or vapour.If your work may expose you to gases, for example from certain coatings, cleaning solvents or shielding gases in a confined space, the right filter type and whether a powered filter unit is suitable at all should come from your risk assessment and the manufacturer, not from guesswork. Check what the filter markings say it protects against before you order a replacement.
Make an airflow check part of every pre-use check. HSE guidance says to check the fan is giving enough airflow before use, to confirm hoses are connected properly and to make sure battery-powered equipment is fully charged. Most makers describe a specific test, often using a flow indicator or by briefly covering the outlet to trigger the warning, so follow the method in your own manual.If the unit shows low flow, a blocked or loaded filter, a loose hose or a weak battery are the usual places to look. Do not start work until the unit passes.
Treat it as a stop signal. HSE guidance says never to keep working if the fan stops or the airflow rate drops, and to leave the work area immediately. Once you are out of the fume, look for the cause: a clogged or damaged filter, a kinked or disconnected hose, or a flat battery are the usual suspects.Only return to work when the system is giving the airflow the manufacturer specifies. If you cannot find a simple fix, withdraw the unit from use and have it checked by a competent person rather than carrying on with it.