0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to common questions about choosing, fitting and looking after M8-thread MIG contact tips.
M8 is the diameter of the thread that screws the tip into the torch. Contact tips come with several thread sizes, commonly M6, M8 and M10, and the thread must match the torch's tip holder.Larger tips are generally found on torches built for heavier current, but the thread size does not tell you a torch's rating. Check the torch's data plate and parts list for the correct tip, including its length and body diameter, as these differ between designs.
Yes. Aluminium wire is soft and expands more than steel wire when heated, so tips for aluminium usually have a slightly larger bore to prevent the wire gripping. They are normally marked for aluminium use.The tip material matters too: copper tips pass current to aluminium wire better than harder alloys. Pair the tip with a smooth-bore plastic-based liner and suitable drive rolls, and avoid steel-wire tips for aluminium.
Look at the hole. The wire wears the bore into an oval shape, which is the first and most telling sign. You may also see an unsteady arc, difficult starts, wire that feeds in fits and starts, or wire welded into the tip.Change tips by their condition rather than a fixed schedule, and do not file or ream a worn one. On heavier work, wire travels through the tip in large amounts, so tips wear steadily and should be inspected often.
Hand-tighten the tip until it seats, then snug it with the proper tool. Avoid over-tightening, which can cause feeding issues and damage the threads.A loose tip overheats and wears out sooner, and blue or purple threads are a sign it has been running hot. If it keeps working loose, check the tip holder for damage, make sure you have the right thread and seat, and replace worn parts.