0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers on choosing, setting up and troubleshooting self-shielded gasless flux-cored wire.
Gasless (self-shielded) wire is a hollow tube filled with flux. When the arc melts the wire, the flux burns to make a shielding gas around the weld pool and also forms a layer of slag over the finished weld. That is why no bottle, regulator or hose is needed.The trade-offs are that the slag has to be chipped off, the bead usually looks rougher than a gas-shielded MIG weld, and there is generally more smoke and spatter. Many people accept this for the portability and the ability to weld outdoors.
Most gasless wire runs on electrode negative, also called straight polarity. On many machines the polarity is changed inside the case near the drive rolls by swapping the lead from one terminal to the other, so it is worth checking the machine manual.Some wires are made for the opposite polarity, so always follow the wire maker's recommendation on the reel or data sheet. Running the wrong polarity gives a harsh, spattery arc, poor bead shape and unreliable results.
Yes, this is one of its main strengths. Because the shielding gas is made inside the weld pool by the flux, a breeze cannot blow it away the way it can with gas-shielded MIG. That makes it popular for site repairs, farm and fencing work, and fabrication outdoors.Very strong wind can still disturb the arc and spread slag and spatter, so shelter the weld where practical. Keep the arc length steady and clean the joint well, because outdoor jobs are often dirty.
Stickout is the length of wire between the contact tip and the work. Gasless wire normally runs with a longer stickout than solid MIG wire; around twice as long is a common rule of thumb. A longer stickout preheats the wire and keeps the flux working properly.Too long a stickout causes porosity, an unstable arc and burnback to the tip, while too short gives excessive spatter and overheats the tip. Follow the wire's data sheet for the right range and adjust in small steps.