Rapid Ref : MONOGO

Plymovent MonoGo Stationary Filter Unit with Economy Extraction Arm
MONOGO

Name: Plymovent MonoGo Stationary Filter Unit with Economy Extraction Arm
SKU: MONOGO

Select Option

Prices From £1890.00 ex VAT

The MonoGo is a stationary welding fume filter with built in fan and hose tube arm (Economy Arm). It contains a disposable HEPA filter cassette. The MonoGo has been designed for occasional welding activities (approximately 1 coil of solid wire or 7.5Kg /16.5lbs of electrodes per month) and TIG welding.

Brochures & Manuals

BROCHURES & MANUALS

View Brochure

Plymovent Stationary Filter Units FAQs

Straight answers to the questions people ask most when choosing and running stationary welding fume filter units.

How do I decide on the size and airflow I need?

Add up the airflow needed at every extraction point that will run at the same time, then allow for duct resistance and some margin. Arm length, hood size, the process and the number of welders all affect the figure.

A unit that is too small will not capture fume properly, while one that is too large wastes energy. A system designer or the supplier can work through this with you, so ask our team to help you choose.

Single-arm units, multi-arm units or a central system - which should I choose?

A single unit with its own arm is simple and good for one station. Several arms on one unit work if the stations share a space and are not all used at once. A central system with ducting suits many stations and gives one place to maintain the filter.

Central systems need more design work and ducting, and their balance matters, but they can be easier to look after in a large workshop.

Can the cleaned air be returned to the workshop?

Often yes, if the filter is rated for the fume and the process does not give off hazardous gases or vapours the filter cannot remove. Returning air saves heating energy and avoids drawing cold air in through the building.

Check the manufacturer's guidance and your risk assessment. Stainless steel, coated materials and some consumables need extra care, and some applications require discharge to the outside instead.

What electrical and compressed air connections are needed?

Larger units normally need a three-phase supply, while smaller ones may run from single phase. Self-cleaning types need a supply of clean, dry compressed air at a stated pressure, unless the unit has its own compressor.

The data plate and manual list the requirements. Electrical connection and air connections should be made by competent people, and the fan rotation should be checked at commissioning.

See all 6 questions for this category