WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7925230090  

    Plymovent UltraFlex-4/ LC 4m Ultraflexible Extraction Arm for Low Ceiling
    7925230090

    £1518.26  EX VAT
     Buy in 3 easy interest free payments of £506.09† with

    The UltraFlex-4 /Low Ceiling is a wall-mounted flexible extraction arm with a rotatable hood, RotaHood. Incorporated into the hood is a throttle valve that can be fully opened, partially opened, or completely closed - to control airflow at hood opening. The arm features a focus extraction spoiler, which directs the air into the hood.

    The arm is provided with the Balance Wheel spring balance system for ultra-light, user friendly positioning of the arm. The UltraFlex-4 / Low Ceiling is suitable for stationary welding fume extraction systems only. It is particularly suitable to be mounted under low ceilings (min 2500mm / 100").

    Brochures, Manuals & Videos

    Related Items

    Plymovent Plastic Tube Arms FAQs

    Straight answers to the questions people ask most when choosing and using flexible and telescopic plastic tube extraction arms.

    What is a plastic tube extraction arm and how does it differ from a metal one?icon-minus-redicon-plus-red

    A plastic tube arm uses a flexible or telescopic tube, usually with a hood on the end, to carry fume from the weld to a fan or filter unit. Because the tube is lightweight and bends or extends, the arm is easy to move around and can reach awkward spots.

    Metal arms are made of rigid sections with joints, so they hold position more firmly and are tougher. Plastic arms are lighter and often simpler to fit, but the tube can be damaged by heat, sparks and knocks more easily, so they suit lighter-duty work and places where the hood is moved often.

    What types of extraction arm are there and how do they differ?icon-minus-redicon-plus-red

    Extraction arms come in several forms, for example arms with a flexible tube that holds its position, arms with rigid sections and joints, and arms that slide in and out to change their length. Makers use different names for these types, and the way they move, how far they reach and how well they hold position vary between ranges.

    Check the maker's description, the reach and the temperature rating for the arm you are considering, and choose one that suits how often the hood is moved and the kind of work you do.

    Will the arm stay where I put it?icon-minus-redicon-plus-red

    A good arm holds its position, but how well depends on the type and its condition. Over time, joints and springs can wear, and the arm can start to drift or droop. Adjustments are usually provided for tensioning, so check the manual.

    Also check that anything added to the hood, such as a light or a heavier hood, has not upset the balance. If an arm will not hold, it is more effective to correct it or replace worn parts than to leave the welder to hold it.

    Can plastic arms be used for hot or spark-heavy work?icon-minus-redicon-plus-red

    Take care. Plastic and fabric tubes can be damaged by hot metal, sparks and spatter, which can burn through them and cause leaks and a fire risk. Temperature ratings differ from one arm to another, so check the data plate and manual for the figures that apply to yours.

    For heavy spatter, cutting or grinding with lots of sparks, an arm made for high temperatures, or a spark arrestor in the duct, is generally the safer choice. Never use an arm where sparks could ignite the tube or the dust collected in it.

    Shop Similar Categories