WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7925220090  

    Plymovent UltraFlex-4 Ultraflexible Extraction Arm - 4m
    7925220090

    £1309.57  EX VAT
     Buy in 3 easy interest free payments of £436.52† with

    The UltraFlex-4 is a flexible extraction arm with a rotatable hood, RotaHood. Incorporated into the hood is a throttle valve that can be fully opened, partially opened, or completely closed - to control airflow at hood opening. The arm features a focus extraction spoiler, which directs the air into the hood.

    The arm is provided with the Balance Wheel spring balance system for ultra-light, user friendly positioning of the arm. The UltraFlex-4 is suitable for both mobile and stationary welding fume extraction systems.

    Features

    • Balance wheel, friction-free spring-supported balance system that compensates the weight of the arm and allows ultra-light repositioning of the arm
    • Low maintenance requirement substantially less than "friction" based arms
    • RotaHood 360° friction-free rotatable extraction hood for easy positioning
    • Light impact resistant industrial plastic tubes
    • Standard 200mm smooth tubes to allow high capacity against low pressure drop
    • Low-ceiling version

    Brochures, Manuals & Videos

    Related Items

    Plymovent Plastic Tube Arms FAQs

    Straight answers to the questions people ask most when choosing and using flexible and telescopic plastic tube extraction arms.

    What types of extraction arm are there and how do they differ?icon-minus-redicon-plus-red

    Extraction arms come in several forms, for example arms with a flexible tube that holds its position, arms with rigid sections and joints, and arms that slide in and out to change their length. Makers use different names for these types, and the way they move, how far they reach and how well they hold position vary between ranges.

    Check the maker's description, the reach and the temperature rating for the arm you are considering, and choose one that suits how often the hood is moved and the kind of work you do.

    How do I choose the right length?icon-minus-redicon-plus-red

    Measure from the mounting point to the furthest place you will weld, and choose an arm that reaches it comfortably without being stretched taut. A fully extended arm can be hard to hold in position.

    Also allow for the ceiling height, and think about where the arm will rest when not in use. Where headroom is limited, special low-ceiling versions exist. If the work area is wide, consider the mounting position or a rail or crane arrangement rather than a very long arm.

    How close should the hood be to the weld?icon-minus-redicon-plus-red

    Close. Capture falls off quickly with distance, so a hood a short way from the arc catches far more fume than one held far away. There is no single distance that suits every hood, because the right position depends on the hood shape, the airflow and any draughts in the workshop.

    Check the maker's advice on the capture distance for your hood. Place it beside or slightly behind the arc, in the direction the fume rises, so fume is drawn away from the welder's face, and re-position it as you move along the joint.

    Will the arm stay where I put it?icon-minus-redicon-plus-red

    A good arm holds its position, but how well depends on the type and its condition. Over time, joints and springs can wear, and the arm can start to drift or droop. Adjustments are usually provided for tensioning, so check the manual.

    Also check that anything added to the hood, such as a light or a heavier hood, has not upset the balance. If an arm will not hold, it is more effective to correct it or replace worn parts than to leave the welder to hold it.

    Shop Similar Categories