WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7925210090  

    Plymovent Flex-4 Flexible Extraction Arm - 4m
    7925210090

    £1036.52  EX VAT
     Buy in 3 easy interest free payments of £345.51† with

    The Flex arm offers a solution for a wide range of welding areas. The arm consists of two fixed, impact resistant synthetic components, with the EasyLift system incorporated in the hinges.

    The Flex-4 is a flexible extraction arm with a rotatable hood, RotaHood. Incorporated into the hood is a throttle valve that can be fully opened, partially opened, or completely closed - to control airflow at hood opening. The arm features a focus extraction spoiler, which directs the air into the hood.

    The arm is provided with an EasyLift advanced friction system for light, user-friendly positioning of the arm. The Flex-4 is suitable for both mobile and stationary welding fume extraction systems.

    Features

    • EasyLift system unlocks friction system of the arm middle hinge and allows light friction-free lifting of the arm
    • RotaHood 360° friction-free rotatable extraction hood for easy positioning
    • Light impact resistant industrial plastic tubes
    • Standard 200mm smooth tubes to allow high capacity against low pressure drop

    Brochures, Manuals & Videos

    Related Items

    Plymovent Plastic Tube Arms FAQs

    Straight answers to the questions people ask most when choosing and using flexible and telescopic plastic tube extraction arms.

    What is a plastic tube extraction arm and how does it differ from a metal one?icon-minus-redicon-plus-red

    A plastic tube arm uses a flexible or telescopic tube, usually with a hood on the end, to carry fume from the weld to a fan or filter unit. Because the tube is lightweight and bends or extends, the arm is easy to move around and can reach awkward spots.

    Metal arms are made of rigid sections with joints, so they hold position more firmly and are tougher. Plastic arms are lighter and often simpler to fit, but the tube can be damaged by heat, sparks and knocks more easily, so they suit lighter-duty work and places where the hood is moved often.

    What types of extraction arm are there and how do they differ?icon-minus-redicon-plus-red

    Extraction arms come in several forms, for example arms with a flexible tube that holds its position, arms with rigid sections and joints, and arms that slide in and out to change their length. Makers use different names for these types, and the way they move, how far they reach and how well they hold position vary between ranges.

    Check the maker's description, the reach and the temperature rating for the arm you are considering, and choose one that suits how often the hood is moved and the kind of work you do.

    How do I choose the right length?icon-minus-redicon-plus-red

    Measure from the mounting point to the furthest place you will weld, and choose an arm that reaches it comfortably without being stretched taut. A fully extended arm can be hard to hold in position.

    Also allow for the ceiling height, and think about where the arm will rest when not in use. Where headroom is limited, special low-ceiling versions exist. If the work area is wide, consider the mounting position or a rail or crane arrangement rather than a very long arm.

    Will the arm stay where I put it?icon-minus-redicon-plus-red

    A good arm holds its position, but how well depends on the type and its condition. Over time, joints and springs can wear, and the arm can start to drift or droop. Adjustments are usually provided for tensioning, so check the manual.

    Also check that anything added to the hood, such as a light or a heavier hood, has not upset the balance. If an arm will not hold, it is more effective to correct it or replace worn parts than to leave the welder to hold it.

    Shop Similar Categories