ESAB Fume Extractors FAQs
Straight answers to the questions people ask most when choosing and using a portable welding fume extractor.
What is a portable fume extractor best used for?

A portable extractor is a compact unit with a fan, a filter and a flexible arm or hose that you position close to the weld. It suits small workshops, repair work, site work and jobs that move around, where a fixed system is not practical.
It works best for light to moderate welding. For several welders working at once, or heavy continuous production, a larger fixed system is usually a better fit.
Why does the supply voltage matter when choosing one?

Portable extractors are made for particular mains supplies, and the unit must match the supply where you will use it. Some sites use a reduced voltage supply for power tools, while workshops use the standard mains supply.
Check the data plate and the supply on your site before choosing. Running a unit on the wrong supply can damage it or create a safety risk, so never use an adaptor to get around a mismatch.
Will the extractor disturb my shielding gas?

It can, if the suction is too strong or the nozzle is too close and pointing straight at the arc. A disturbed gas shield causes porosity in the weld.
Place the nozzle to the side and slightly behind the weld, and adjust the distance and angle until the fume is captured without blowing the gas away. Test on scrap material first if the weld quality is critical.
Does a portable extractor remove the need for a respirator?

Not automatically. Source extraction reduces your exposure, but it may not remove the hazard completely, especially in confined or awkward positions or with some materials. Whether you also need respiratory protection depends on your risk assessment, the material, the process and the fume levels.
The HSE treats all welding fume, including mild steel fume, as a cause of lung cancer, so suitable controls must be in place and checked. Use extraction as one part of your controls, and follow the HSE guidance on welding fume.