WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7900020300  

    Plymovent CB Control Box
    7900020300

    £377.39  EX VAT
     Buy in 3 easy interest free payments of £125.80† with

    The CB is a control box which supplies power to the in the extraction arm integrated Working Light (WL) / automatic start/stop device (AST), extraction fan and optional automatic damper.

    The CB arranges the extraction fan to switch on and off automatically. When the welding starts, the AST sends a signal to the CB. Subsequently, the extraction fan automatically switches on.

    When the welding stops, the fan automatically switches off. Depending on the specific circumstances / the user’s wish, the initial delay and the run-out period of the fan can be adjusted.

    The CB can also be used for connecting a stationary welding fume filter SFS. To be used in combination with one thermal relay (NTR) which is to be ordered separately. Up to 3kW.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       Plymovent CB User Manual

    Related Items

    UltraFlex-3 / 4 Spare Parts FAQs

    Straight answers to the questions people ask most when choosing and fitting spare parts for a flexible spring-balanced fume extraction arm.

    How do I identify the right spare for my extraction arm?icon-minus-redicon-plus-red

    Find the model on the arm's data plate or label, then use the manual's parts list and drawing. Note whether the arm is wall mounted or fitted to a mobile unit, and look at the hose diameter and the number of sections.

    Parts for different arm versions can look alike but differ in length, size or fixing. If you are unsure, our team can help you match the part.

    Why does my arm sag or fail to hold its position?icon-minus-redicon-plus-red

    Extraction arms are usually balanced by springs or similar counterbalance parts and held in place by friction in the joints. A sagging arm often points to a weakened or broken spring, a loosened joint or worn friction parts.

    Check the joint tension first, but only if the manual for your arm allows it. Whether springs should be replaced singly or together depends on how your arm is built, so follow the parts list and instructions for your own model. Support the arm before any work, because springs can hold stored force. If you are unsure, use a competent engineer.

    Should I replace springs singly or together?icon-minus-redicon-plus-red

    Check the manual and parts list for your own arm, as the right approach depends on the design. Some arms use matched springs that share the load, and fitting a new spring beside an old, tired one can leave the balance uneven so the arm tilts or drifts. Others are designed for single replacement.

    If the manual does not say, ask our team or the maker's service department before you start. Springs hold stored force, so support the arm, wear eye protection and gloves, and follow the manual's steps. If you are not confident, use a competent engineer.

    How do I know when to replace the hose pieces?icon-minus-redicon-plus-red

    Replace a hose piece if you see tears, burn marks, collapsed sections, or loose ends. Flexible hoses are often made in pieces for the hood, middle and wall ends, so you only need to replace the damaged one.

    Make sure that the replacement has the correct diameter and fittings. A damaged hose cuts suction and lets fume escape.

    Shop Similar Categories