WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 7435000000  

    Plymovent SFD Stationary Welding Fume Filter Unit with Disposable Filter
    7435000000

    £2565.22  EX VAT
     Buy in 3 easy interest free payments of £855.07† with
    Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

    The SFD is a wall-mounted filter unit for welding fume extractions systems up to 1250 m3/h. The filter has a disposable filter, making it suitable for occasional /light welding applications. The filter is treated with pre-coat to enhance life span and filter efficiency. The SFD requires no electricity. Includes DuraFilter cartridge and filter pollution indicator.

    Features

    • Long filter life
    • Large internal spark arrester
    • Full filter indicator

    Recommended for
    Light application with occasional welding conducted in repair shops and welding schools.

    Brochures, Manuals & Videos

    Related Items

    Plymovent Stationary Filter Units FAQs

    Straight answers to the questions people ask most when choosing and running stationary welding fume filter units.

    How do I decide on the size and airflow I need?icon-minus-redicon-plus-red

    Add up the airflow needed at every extraction point that will run at the same time, then allow for duct resistance and some margin. Arm length, hood size, the process and the number of welders all affect the figure.

    A unit that is too small will not capture fume properly, while one that is too large wastes energy. A system designer or the supplier can work through this with you, so ask our team to help you choose.

    What are the main filter types, and how do they differ?icon-minus-redicon-plus-red

    Most welding fume units use a filter material, often pleated cartridges, to trap particles. Some are replaced when full, while others clean themselves in place with pulses of compressed air that knock dust into a collector. Other designs charge particles and collect them on plates that must be washed or wiped clean.

    The right choice depends on the fume, how many hours the unit runs each day and the maintenance you can carry out. Check the data plate and manual of the unit you are considering for the filter type, the cleaning method and the service interval.

    Can the cleaned air be returned to the workshop?icon-minus-redicon-plus-red

    Often yes, if the filter is rated for the fume and the process does not give off hazardous gases or vapours the filter cannot remove. Returning air saves heating energy and avoids drawing cold air in through the building.

    Check the manufacturer's guidance and your risk assessment. Stainless steel, coated materials and some consumables need extra care, and some applications require discharge to the outside instead.

    What electrical and compressed air connections are needed?icon-minus-redicon-plus-red

    Larger units normally need a three-phase supply, while smaller ones may run from single phase. Self-cleaning types need a supply of clean, dry compressed air at a stated pressure, unless the unit has its own compressor.

    The data plate and manual list the requirements. Electrical connection and air connections should be made by competent people, and the fan rotation should be checked at commissioning.

    Shop Similar Categories