0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers on choosing, fitting and looking after a lightweight air-cooled MIG torch of this size class and its swan necks.
On many torches of this type the handle and cable are separate from the neck (the curved tube that carries the contact tip and nozzle), so you can choose the neck shape that suits your work. A neck must be matched to the torch size class and to the maker's neck style, because necks from different styles usually do not interchange.Check the data plate, the manual or the markings on your existing neck and match the size class and the fitting before ordering. If you are unsure, our team can help you choose.
Choose the shortest cable that lets you reach the work comfortably from the wire feeder. An overly long cable tends to tangle and puts more strain on the liner, while a cable that is too short pulls on the machine and strains the connections.Think about where the machine will stand and how far you need to move around the job. Keep the cable laid out as straight as practical in use, and keep it clear of vehicles, moving equipment and sharp edges.
Access and visibility matter most. Neck angles of about 45 or 60 degrees are both common for fillet welds, fabrication and joints with limited access, and a straight or shallower neck can suit open, flat work. The angle changes how the nozzle approaches the joint, so a tight corner usually needs more bend and an open joint less. Hand size, handle style and your own height can also change which angle feels best.If you often weld in awkward positions, keep a second neck of a different angle or length. Make sure any neck you choose is the correct style and size class for your torch.
The liner must match both the wire material and the wire diameter. Steel liners suit steel wire, while a plastic-type liner (such as PTFE or nylon) is generally used for softer aluminium wire because it creates less friction. Using a liner that is too tight causes jamming and shaving, and one that is too loose lets the wire buckle.A torch should never be run without a liner. Fit the right type and bore size whenever you change wire, and check the torch manual for the correct liner for your cable length.