WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000101758  

    Plymovent MF-30 Stationary Welding Fume Filter Unit with Mechanical Filter
    0000101758

    £2355.18  EX VAT
     Buy in 3 easy interest free payments of £785.06† with
    Please note, this product does not qualify for our standard shipping rates outside of the UK Mainland. Please contact us for shipping rates for this product.

    Flexible and expandable mechanical filter

    The MF is a wall-mounted filter unit for welding fumes and light dust. The filter can be used in extraction systems with air volumes up to 1200m3/h. The MF allows flexible filtration when changes in production take place. If the application changes you can easily insert a different media in the same cabinet. Includes wall bracket, aluminium pre filter and glass fibre cassette GFMF. Inlet for direct mounting of 1 or 2 extraction arms (KUA or EA) underneath.

    Features

    • Adapts to changes in production
    • Expandable, simply add another module
    • Easy to reconfigure
    • Mix-and-match for tailor-made solution

    Recommended for
    Light application with occasional welding conducted in repair shops and welding schools.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       MF-30 MF-31 User Manual

    Related Items

    Plymovent Stationary Filter Units FAQs

    Straight answers to the questions people ask most when choosing and running stationary welding fume filter units.

    How do I decide on the size and airflow I need?icon-minus-redicon-plus-red

    Add up the airflow needed at every extraction point that will run at the same time, then allow for duct resistance and some margin. Arm length, hood size, the process and the number of welders all affect the figure.

    A unit that is too small will not capture fume properly, while one that is too large wastes energy. A system designer or the supplier can work through this with you, so ask our team to help you choose.

    What are the main filter types, and how do they differ?icon-minus-redicon-plus-red

    Most welding fume units use a filter material, often pleated cartridges, to trap particles. Some are replaced when full, while others clean themselves in place with pulses of compressed air that knock dust into a collector. Other designs charge particles and collect them on plates that must be washed or wiped clean.

    The right choice depends on the fume, how many hours the unit runs each day and the maintenance you can carry out. Check the data plate and manual of the unit you are considering for the filter type, the cleaning method and the service interval.

    Single-arm units, multi-arm units or a central system - which should I choose?icon-minus-redicon-plus-red

    A single unit with its own arm is simple and good for one station. Several arms on one unit work if the stations share a space and are not all used at once. A central system with ducting suits many stations and gives one place to maintain the filter.

    Central systems need more design work and ducting, and their balance matters, but they can be easier to look after in a large workshop.

    Can the cleaned air be returned to the workshop?icon-minus-redicon-plus-red

    Often yes, if the filter is rated for the fume and the process does not give off hazardous gases or vapours the filter cannot remove. Returning air saves heating energy and avoids drawing cold air in through the building.

    Check the manufacturer's guidance and your risk assessment. Stainless steel, coated materials and some consumables need extra care, and some applications require discharge to the outside instead.

    Shop Similar Categories