SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
0000101182 Plymovent ERC-5.8 Extraction Rail 5.8m for KUA or EA Extraction Arm
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000101182  

    Plymovent ERC-5.8 Extraction Rail 5.8m for KUA or EA Extraction Arm
    0000101182

    £3735.65  EX VAT
     Buy in 3 easy interest free payments of £1245.22† with
    Shop Parts

    PlymoVent’s new KUA on the extraction rail is a unique product combination, where the most flexible extractor arm on the market has been mounted on a carriage, that allows it to run along an extraction rail. The KUA-arm itself is technically, economically and aesthetically the perfect solution for small and medium sized work places. Together with the extraction rail, the KUA-arm is not only the most flexible extractor on the market for fume, gases, but it also has a reach that is only limited by the length of the rail. Ideal where no permanent work places exist or for extended work areas. 

    Brochures & Manuals

    BROCHURES & MANUALS
       Plymovent ERC User Manual

    Related Items

    Plymovent Extraction Arm Accessories FAQs

    Straight answers to the questions people ask most when choosing accessories for fume extraction arms.

    How do I know an accessory is compatible with my arm?icon-minus-redicon-plus-red

    Check the arm's model and size on its data plate, then compare it with what the accessory states it fits. Duct diameter, mounting type and electrical supply all matter, and similar-looking items are often made for different arm families.

    If the accessory lists compatible arms, make sure yours is on the list. If you are unsure, send our team the model details and photographs.

    What is the point of an automatic start and stop switch?icon-minus-redicon-plus-red

    An automatic switch starts the fan when the arm is moved into position or when light from the weld is detected, and stops it again when the work finishes. This saves energy and noise because the fan is not running while nobody is welding.

    For best results, the sensor needs to be positioned and set up as the instructions describe, otherwise it may start late or stop while welding continues.

    Do I need a working light on my extraction arm?icon-minus-redicon-plus-red

    A light is not essential, but it is a real help when preparing a weld and when working inside fixtures or under hoods, because it lights the area you are extracting from. It is common on arms used for grinding, fitting and inspection.

    Lights must be rated for the voltage supplied and are often low voltage with a transformer. Replace failed lamps with the specified type.

    What does a shut-off damper do on an extraction arm?icon-minus-redicon-plus-red

    A damper is an adjustable flap in the duct. Closing it can stop air being drawn through an arm that is not in use. Some designs can also be set partly closed to help share airflow between arms on one fan.

    Whether this is suitable depends on the system, so follow the maker's instructions for your own arms and fan. Make sure the damper suits the duct diameter, moves freely, and that airflow at the hood is still adequate after any change.

    See all 6 questions for this category

    Shop Similar Categories