WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000100776  

    Plymovent MistWizard MW-2 Oil Mist Filter without Fan
    0000100776

    £1467.83  EX VAT
     Buy in 3 easy interest free payments of £489.28† with

    A direct mounted solution for single machine tool applications.

    MistWizard is designed to be direct mounted on a machine tool with no need for ducting or use of additional floor space. The filter will effectively collect the coolant mist and smoke from the machine process and return the recovered coolant back to the machine tool. The filter unit is provided with a range of options to allow easy, fast installation.

    MistWizard™ without fan. Coolant recovery filter for air volume up to 550m³/h. Machine enclosure size up to 2m³. Filter life indicator 0 - 1000 Pa included. Picture shown: MistWizard with optional MW-FAN-KIT and fan, see related items for these options.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       MistWizard User Manual

    Related Items

    Plymovent Stationary Filter Units FAQs

    Straight answers to the questions people ask most when choosing and running stationary welding fume filter units.

    What is a stationary filter unit and where is it used?icon-minus-redicon-plus-red

    A stationary filter unit is a fixed fan and filter assembly that draws contaminated air from one or more extraction points, cleans it and either returns it to the workshop or discharges it. Sizes range from small units serving a single arm to central systems serving a whole workshop.

    They suit permanent welding stations, production lines, cutting tables and general fume and dust control.

    How do I decide on the size and airflow I need?icon-minus-redicon-plus-red

    Add up the airflow needed at every extraction point that will run at the same time, then allow for duct resistance and some margin. Arm length, hood size, the process and the number of welders all affect the figure.

    A unit that is too small will not capture fume properly, while one that is too large wastes energy. A system designer or the supplier can work through this with you, so ask our team to help you choose.

    What are the main filter types, and how do they differ?icon-minus-redicon-plus-red

    Most welding fume units use a filter material, often pleated cartridges, to trap particles. Some are replaced when full, while others clean themselves in place with pulses of compressed air that knock dust into a collector. Other designs charge particles and collect them on plates that must be washed or wiped clean.

    The right choice depends on the fume, how many hours the unit runs each day and the maintenance you can carry out. Check the data plate and manual of the unit you are considering for the filter type, the cleaning method and the service interval.

    Can the cleaned air be returned to the workshop?icon-minus-redicon-plus-red

    Often yes, if the filter is rated for the fume and the process does not give off hazardous gases or vapours the filter cannot remove. Returning air saves heating energy and avoids drawing cold air in through the building.

    Check the manufacturer's guidance and your risk assessment. Stainless steel, coated materials and some consumables need extra care, and some applications require discharge to the outside instead.

    Shop Similar Categories