SHOW PRICES INCLUDING VAT
Trustpilot
Click to visit the Rapid Blog - Supporting welders every step of the way
0Your Basket : £ 0.00
WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
0000100304 Plymovent FUA-2100 Extraction Fan 0.75kW, Ø 160mm Outlet, 230 - 400v 3ph
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : 0000100304  

    Plymovent FUA-2100 Extraction Fan 0.75kW, Ø 160mm Outlet, 230 - 400v 3ph
    0000100304

    £1236.52  EX VAT
     Buy in 3 easy interest free payments of £412.17† with
    Shop Parts

    The FUA series ventilation fans are designed for direct mounting on Plymovent metal and hose tube extraction arms and filters or for use as central fans. These fans are equipped with lightweight aluminium impellers, suitable for extracting welding exhaust gases, volatile fumes and dust. Matched inlet and outlet areas provide, together with the optimised impellers, an even airflow, high capacity and low noise level.

    Features

    • Direct mount
    • Low noise level
    • Rotational outlet

    Recommended for
    A small extraction system for vehicle exhausts removal, welding fumes, oil mist and dust. Direct mounting on KUA, LM-2 or EA extraction arms.

    Brochures & Manuals

    BROCHURES & MANUALS
       View Brochure
       FUA Fan User Manual

    Related Items

    Plymovent Extraction Fans FAQs

    Straight answers to the questions people ask most when choosing extraction fans for welding fume, oil mist and dust.

    What does an extraction fan do in a fume extraction system?icon-minus-redicon-plus-red

    The fan creates the airflow that pulls contaminated air from the hood or arm, through the ducting and filter if there is one, and out or back into the workroom. Without enough airflow, even a good hood will not capture fume.

    Choosing the fan is a matter of airflow and resistance. It must move the volume of air needed at the pressure lost in the arms, ducts and filters.

    Can the fan be mounted outdoors?icon-minus-redicon-plus-red

    Only if the maker states that the fan and its motor are suitable for outdoor use. Rain, damp, frost and temperature swings can damage motors, bearings and electrical parts, and a fan not built for it may fail early or become unsafe.

    Check the data plate and manual for your own fan for its protection rating and any cover or mounting requirements, and fit it exactly as instructed. Position the exhaust discharge well away from air inlets, windows and doors so that extracted air is not drawn back in.

    Why is my extraction fan noisy?icon-minus-redicon-plus-red

    Common causes are an unbalanced or dirty fan wheel, worn bearings, loose mountings or housing, a damaged inlet or outlet, and airflow turbulence from tight bends close to the fan. A fan running outside its intended range can also be noisy.

    Isolate the fan before inspecting it. Clean and rebalance or replace the wheel, tighten fixings, and fit anti-vibration mounts or silencers if needed.

    Why does the direction of rotation matter?icon-minus-redicon-plus-red

    A fan wheel is shaped to move air when it turns the intended way. On a three-phase motor, swapping any two phase connections reverses the rotation. Running backwards can sharply cut the airflow, or on some types push air the wrong way, so extraction may be weak even though the fan sounds and feels normal.

    Check the direction against the arrow marked on your fan, and the manual, when it is first wired and after any electrical work. Have the connections made and checked by a competent electrician, with the supply isolated.

    See all 6 questions for this category

    Shop Similar Categories