0 items in your basket
Total £ 0.00 EX VAT
Mobile Fume Extractors
Extraction Arms & Fans
Plymovent Extraction Fans
Plymovent Hose Tube Arms
Plymovent Metal Tube Arms
Plymovent Plastic Tube Arms
Plymovent Extraction Arm Accessories
Stationary Filter Units
Spark Arrestors
Extraction Tables
Control Equipment
FlexHood
Filters & Spare Parts
Extraction Arm Spare Parts
Stationary Filter Unit Spares
Mobile Filter Unit Spares
Plymovent Fan Spares
Plymovent Extraction Table Spare Parts
Plymovent Filters
Environment Diluter System
Easy Solutions For Source Extraction
Mobile / Portable Solutions
Stationary Solutions
Stationary Solutions with Filter Units
Downdraft Tables
Machine Tool Applications
RPE Air Fed Helmets
Aeroguard Air Quality Monitor
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Straight answers to the questions people ask most when choosing and using a portable welding fume extractor.
A portable extractor is a compact unit with a fan, a filter and a flexible arm or hose that you position close to the weld. It suits small workshops, repair work, site work and jobs that move around, where a fixed system is not practical.It works best for light to moderate welding. For several welders working at once, or heavy continuous production, a larger fixed system is usually a better fit.
Portable extractors are made for particular mains supplies, and the unit must match the supply where you will use it. Some sites use a reduced voltage supply for power tools, while workshops use the standard mains supply.Check the data plate and the supply on your site before choosing. Running a unit on the wrong supply can damage it or create a safety risk, so never use an adaptor to get around a mismatch.
As close as you can get without interfering with the work, and positioned so the fume is drawn away from your face. Capture falls away quickly with distance, so a nozzle held too far from the arc captures very little.Reposition it as you move along the joint. Take care that the airflow does not disturb the shielding gas around the weld, as that can cause defects. Check the manual for your own extractor for the recommended nozzle distance and position.
It can, if the suction is too strong or the nozzle is too close and pointing straight at the arc. A disturbed gas shield causes porosity in the weld.Place the nozzle to the side and slightly behind the weld, and adjust the distance and angle until the fume is captured without blowing the gas away. Test on scrap material first if the weld quality is critical.
Signs include weaker suction, a warning light or indicator if the unit has one, more visible fume escaping, and a noticeable rise in the noise of the motor as airflow drops. A blocked filter reduces capture, so the unit looks as if it is working but protects you less.Follow the maker's guidance on checking and changing filters. Handle used filters carefully, as they contain the welding fume that has been collected, and dispose of them as the regulations for your waste require.
Not automatically. Source extraction reduces your exposure, but it may not remove the hazard completely, especially in confined or awkward positions or with some materials. Whether you also need respiratory protection depends on your risk assessment, the material, the process and the fume levels.The HSE treats all welding fume, including mild steel fume, as a cause of lung cancer, so suitable controls must be in place and checked. Use extraction as one part of your controls, and follow the HSE guidance on welding fume.